Stakeholder Analysis of the tournament Roland Garros with their Essay

Stakeholder Analysis of the tournament Roland Garros with their objectives and goals - Essay Example responsibility organizations including those with specific areas such as the banking sector and communication sector as well as those with very general ideas in their scope. Organizers collaborate with such organizations in developing and promoting corporate responsibility in different parts of the world. The management of Roland Garros tournament has established a specific organizational structure within the ranks of organizers, which works with a dedicated team operating form the corporate social responsibility headquarters. Roland Garros also called the French Open is one of the four annual Grand Slam tournaments in the world in addition to Wimbledon, the United States Open, and the Australian Open. Recently great tennis players have participated including Raphael Nadal, Milan Djokovic, Llodra, and Gasquet among many more. Stakeholders term it as a showcase for all of France. The tournament is unique because it is the only tournament played on clay. The tournament was held in nineteen twenty-eight at Porte d’Auteoil in Paris (Panat and Golinelli 1991). Stakeholders keep increasing aura of Roland Garros every year brings out some of the dazzling sporting achievements from the biggest tennis international players. The four musketeers consisting of Borota, Cochet, Brugnon, and Lacoste brought a lot success to the tournament, adding flavor to the initial foundation of professional tennis in France. The efforts of the four players quickly led the tournament getting global recognition. Organizers made sure that in nineteen sixty-eight they held the first tournament where both amateurs and professional participated. Stakeholders hold memories of great players including Gustavo Kuerten, Bjorn Borg, and Mats Wilander. The tournament saw in nineteen eighty-three a win by the first ever French player (Evans 1991). This was Yannick Noah. The stakeholders always use ten thousand employees to organize the tournament successfully. Sponsors increase every year including

Long period of time Essay Example for Free

Long period of time Essay What Techniques does Dickens use in Great Expectations to gain and sustain his readers attention and interest, and how effective do you find these techniques? Illustrate your answer using examples from the text?  Although Great Expectations was written some 150 years ago it is still being read even today. Dickens grabs the readers attention from the very start and manages to sustain it throughout the book by using a variety of techniques which I am going to explore in more depth. The chapter begins with the introduction of Pip and saying how his name came to be. My Fathers family name being Pirrip and my Christian name being Philip this gives the reader an impression that Pip is youre genuinely average person and the main character will most probably be Pip as he is introduced very sharply in the opening paragraph. Dickens characterises Pip and his tone of voice as learned and precise and uses formal vocabulary which may suggest he has had a good upbringing and his family are strong on manners and respect. Pip then begins to tell the reader that he never knew his parents and has never even seen them in photos let alone real life I never saw my Father or my Mother, and never saw and likeness of either of them Although he had never seen his Mother or Father humour and pathos combine in Pips explanation of how he formed a mental image of his parents The shape of the letters on my Fathers [tombstone] gave me an odd idea that he was a square, stout, dark man with curly black hair Pip is shown as having a very powerful imagination and that he needed to create an image of his Father he never knew from whatever was left of him that he could find, even though it wasnt very promising. In the third paragraph Pip begins to describe the scenery and whereabouts of his location Ours was marsh country, down by the river, within, as the river wound, twenty miles of the sea. Pip describes the area as if a camera was scanning the landscape and that we could see what he was describing which I think is very effective as it makes the reader more involved in the story as if they were there with him. Pips smallness, suffering and vulnerability is emphasised further on in the book At such a time I found out for certain, that this bleak place overgrown with nettles was the churchyard ; and that Philip Pirrip, Georgiana were dead and buried and that Alexander, Bartholomew, Abraham, Tobias and Roger were also dead and buried. This gives the reader a sense of sympathy towards Pip as most of his family are dead and that he hasnt got much in his life. It also gives the reader an impression that Pips days are few as his family hasnt got a good track record of living long and this may worry Pip. The scenery dark flat wilderness and distant savage lair reflects Pips emotional state and feeling of no hope, which backs up the idea that Pips days are few and death may be around the corner. Dickens uses a mixture of emotions to fully gain and sustain the readers interest, and all of the characters have different personalities and physical features. Dickens also uses characternyms as a sharp way to introduce the individuality of the character and by one short phrase or even a word we can create a mental picture of what the character looks like. My name is Jaggers. The reader would feel by reading this that he is a hard, stern man with little emotion and that he has a jagged personality.  Mr Wopsle, the clerk at the church This is a very funny name and Dickens is trying to amuse the reader as the name isnt very common.  Uncle Pumblechock This is also a very funny name and suggests he may be an arrogant person with a posh, pompous personality. Dickens mixes humour with seriousness consistently throughout the course of the book and balances this just right to keep the reader wanting to keep going on and read more. He does this throughout the description of Mrs. Joe and forces the reader into creating their own image of her by saying things which offer little help in knowing what she may look like Not good looking. This is brief but it is backed up by an in-depth description of her personality which may help the reader complete the jigsaw in terms of Miss Joes appearance. He tells us. She must have made Joe marry her and had established a great reputation.. Because she had bought me up by hand. This gives the reader a clear idea of Mrs Joes personality as from those two phrases the reader can gather that she is a very strict, temperamental and bossy woman. Dickens uses a wide variety of techniques to make his novel more enjoyable and for the reader not to want to put it down. He illustrates every scene very well by using repetition, similes and metaphors. He uses repetition as a technique to reinstate his thought and to make the reader almost feel as if he/she is there, as the point has been emphasized twice. It was wretched weather; stormy and wet, stormy and wet; and mud, mud, mud deep in all the streets It also makes us feel as if it has been raining for a long period of time. Another example of Dickens using repetition as a technique to gain and sustain his readers attention is when Pip meets the convict who when talking to Pip uses the word and many times, this shows that he feels over-whelmed by the presence of Pip and a bit scared as he stutters to find words as he uses and a lot. A fearful man all in coarse grey with a great iron on his leg. A man with no hat, and with broken shoes, and with an old rag ties round his head. A man who had been soaked in water, and smoothed by mud, and lamed by stones, and cut by flints, and stung by nettles, and torn by briars; who limped, and shivered, and glared and growled; and whose teeth chattered in his head as he seized me by the chin. Another technique that Dickens uses to devastating effect I feel is the pace as this keeps the reader interested at all times, he builds momentum up to a particular scene by keeping a consistent pace and then slows the pace down when using very descriptive language which creates suspense for the reader and keeps the readers imagination open as to what may happen next. He looked about him with the strongest air. Pulled off a rough outer coat. and. Hat. I saw that his head was furrowed and bald. Long iron grey hair growing on its sides. He stopped in his looking at me, and slowly rubbed his right hand over his head. He sat down on a chair that stood by the fire, and covered his forehead with his large brown veinous hands. Towards the end of the book Dickens does the opposite and uses an acceleration of pace. They had pulled one sudden stroke ahead, had got their oars in, had a run thwart us, and were holding on to out gunwale, before we knew what they were doing. This shows Pip as being excited as he is rushing what he is saying as he is not describing anything in detail and cant to say what happened. Another very good technique that dickens uses in Great Expectations is Dickenss larger than life characters that have been exaggerated to make the story come alive and more believable. A good example is Miss Havisham, as she is regularly described by Pip as some ghastly waxwork from the fair and having dark eyes. She is also described as a skeleton, and someone who had shrunk to skin and bone and having clothes that were faded and lost their brightness. This makes the reader perceive her as a very evil and dead person.  As I can see from his wide range of techniques that are used to great effect Dickens is able to gain and sustain the readers interest from the very start and keeping it going right through to the end of the book which makes Great Expectations so well renowned even today.

John F. Kennedy Vs. Lynden B. Essay -- essays research papers

The question I am about to answer can not be answered in brief. To fully comprehend the similarities and differences between John F. Kennedy’s â€Å"New Frontier† and Lyndon B. Johnson’s â€Å"Great Society† you must understand their intentions first. John F. Kennedy was not an ordinary President. He was one with a certain â€Å"charisma†, as some put it. He was very blunt and knew how to get what he wanted. During his rain as President, he created the reform program know as the â€Å"New Frontier†. The New Frontier was developed to assure Americans of the upcoming sixties’ challenges. This was a program that affected all. Under the influence of the New Frontier Kennedy promised to defend freedom around the world. He stated: â€Å"Let every nation know, whether it wish us well or ill, that we shall pay any price, bear any burden, meet any hardship, support any friend or oppose any foe in order to assure the survival and success of lib erty. This we pledge and more.† Soon Kennedy’s speech would be put to the test. The debate over communism or democracy was still going on. The Cold War had not yet ended. During his presidency Kennedy was determined to lower unemployment by creating more jobs. He expanded the space program and stimulated military spending. He also cut taxes to give Americans a little more money to spend. This tax cut lead to a period of prosperity. He proposed a medical care program for the elderly. It was rejected by congress. Kennedy appointed black officials to higher governmen... John F. Kennedy Vs. Lynden B. Essay -- essays research papers The question I am about to answer can not be answered in brief. To fully comprehend the similarities and differences between John F. Kennedy’s â€Å"New Frontier† and Lyndon B. Johnson’s â€Å"Great Society† you must understand their intentions first. John F. Kennedy was not an ordinary President. He was one with a certain â€Å"charisma†, as some put it. He was very blunt and knew how to get what he wanted. During his rain as President, he created the reform program know as the â€Å"New Frontier†. The New Frontier was developed to assure Americans of the upcoming sixties’ challenges. This was a program that affected all. Under the influence of the New Frontier Kennedy promised to defend freedom around the world. He stated: â€Å"Let every nation know, whether it wish us well or ill, that we shall pay any price, bear any burden, meet any hardship, support any friend or oppose any foe in order to assure the survival and success of lib erty. This we pledge and more.† Soon Kennedy’s speech would be put to the test. The debate over communism or democracy was still going on. The Cold War had not yet ended. During his presidency Kennedy was determined to lower unemployment by creating more jobs. He expanded the space program and stimulated military spending. He also cut taxes to give Americans a little more money to spend. This tax cut lead to a period of prosperity. He proposed a medical care program for the elderly. It was rejected by congress. Kennedy appointed black officials to higher governmen...

Ray Bradbury :: History

Ray Bradbury Ray Bradbury was born on August 22, 1920. He was the third son of Leonard Spaulding Bradbury (a telephone lineman for Waukegan Bureau of Power & Light [Wolfe 62, http://www.brookingsbook.com/bradbury/biography.htm]) and Esther Marie Bradbury (a Swedish immigrant [Snodgrass 73]). Ray lived in Waukegan, Illinois for six years until his family left to Tucson, Arizona in 1926. (http://www.brookingsbook.com/bradbury/biography.htm. When Ray Bradbury was eleven, he would be writing stories on butcher. (http://www.brookingsbook.com/bradbury/biography.htm) Ray was very much into science fiction, horror movies, books, comic books, and magic acts. (Snodgrass 73) At age 12, Ray read a newspaper headline reading "World Would End Tomorrow". (Tucson 1932) Young Ray was all excited about this event so he and his brother packed a lunched and camped out on a ridge to see the end. They waited for some time and nothing happened. Disappointed, he and his brother left the ridge and went home. From that point on, Ray vowed to separate from religion. Why? Because he doesn't like a god who likes to see his people run in pseudo-terror. (Vollmer) In 1932, - after his father, Leonard Spaulding Bradbury, was laid off work because of the depression - his family moved to Los Angeles, California. (http://www.brookingsbook.com/bradbury/biography.htm) In 1935, at the age of fifteen, Ray would continue writing stories. Every once in a while he would send them to national magazines for print. (Wolfe 63) None of his work, at this time, was printed. Even though his work was never published, that didn't dispair him from his love of science fiction. With that, he joined the Los Angeles Science-Fiction Society. (Snodgrass 73) Later in the same year, Ray printed out his own magazine called Futura Fantasia. Futura Fantasia only consisted of Ray Bradbury's work. The magazine lasted for only four issues. (Snodgrass 73) In 1938, Ray Bradbury finished High School at Los Angeles High School in Los Angeles, California. (McNelly 918) Nearly four years of trying to have one of this stories being published, Ray has his fist printing with Imagination! Magazine and the story called Hollerbochen's Dilemma. (http://www.brookingsbook.com/bradbury/biography.htm) This was a big break for Ray. He had never had a piece of work of his being printed. Some of Ray's influences have been "†¦ L. Frank Baum's magic land of Oz, the never-never Africa of Edgar Rice Burroughs' Tarzan of the Apes, and Barsoom, Burroughs' impossible, romantic Mars†¦". (McNelly 918) But with even these writers, his biggest influence was not of a writer, but of a magician act of a passing circus.

Effective communication unit 1 D2 Essay

(D2) – Whist taking part in both group interactions and one to one interactions there are many factors that influence the effectiveness of each. This essay will therefore evaluate the factors in which I came across which were an influence to my effectiveness in the interactions. Firstly in the one to one interaction I feel the factors that came across which made my interaction effective was my speech as I feel that I used a clear pronunciations to the service user which allowed her to understand me better so that they weren’t confused with the words I spoke. I also took my time when speaking to her so that she didn’t feel I was rushing her, I did this in order to try and make her open up slightly as she would know I am there to help and spend time focusing on her and her needs so that she didn’t feel that I had better things to do with my time and that I didn’t want to be with her. Also this may make her gain a level of trust with me during the duration which will make her feel like she has someone she can rely on is not alone. I also feel that in my interaction making myself aware of her needs/situation before hand made it easier for me to understand why she was in that state as a service user in the first place and so therefore I didn’t have to recap over the bad parts of her life as that may of got her upset and made her not want to talk even more. This also helped me as I was able to think of advice beforehand so it could be better thought out advice which would hopefully be helpful to her and if she felt the advice was good then this may make her feel that I actually can help her and that there is hope in overcoming her situation. Whilst talking to her I showed my full interests into the communication and interpersonal skills that were taking place and I did this by looking interested and being focused on just her and not having any distractions around me. This would hopefully have made her feel like I am not interested in something else as that may have made her feel that I am not there to help. I felt by doing this it was a strength as it made her open up slightly due to acting as though I want to hear what she has to say and giving her the time to say it and that I was defiantly listening to her. Throughout the period of talking to her I showed assertiveness which made me portray that I was positive and confident. This hopefully then made her feel like I am not going to give up on her and that  would make her have hope in herself that there is a positive outcome. This then would hopefully have made her open up and talk due to wanting to give me information which I can then help her with in order to get her back on track and to have the positive outcome she wants. She spoke about her past in the interaction and about how her mother and father were in prison, at this point she showed a sense of embarrassment and disappointment in them and so therefore I portrayed an appropriate attitude by not judging what is being said to me and saying that this is all in confidence. So that she felt that there is nothing to be ashamed of. When speaking to her I used reflective listening as this would make her understand that I have taken into account what she has been telling me due to me repeating it in a different way, this also lets her know that I understand what she is trying to tell me and will get her to speak more in depth so that I understand exactly what she wants to happen and how she feels. When we were talking I was sitting upright in order to show that I was alert and listening as I would need to look alert in order for the service user to feel that I am aware of what they are saying and that I am bothered about the conversation. I feel that weaknesses to my one to one interaction was that I repeated myself slightly in some conversations due to her body language looking as though she wasn’t listening and this made her feel frustrated as her tone changed acting as though I was patronizing her and that she heard it the first time and wasn’t stupid, to improve this I would therefore give her time to answer what was said and not repeat myself even if she looks like she isn’t listening, if she still doesn’t answer after some time I will repeat the question again although word it in a different way so that it is not the same. I also feel I could of improved on a part of the interaction as I entered a sensitive subject quite early on in the interaction about the death of her auntie which seemed to have put her in an upset frame of mind as I feel that she hadn’t got comfortable enough with me at that time of the conversation to talking about a close subject so I feel that this was a weakness to the interaction, although I brought it back to being effective by showing her the support networks available to her which put her mind at rest and made her feel like she wasn’t alone. In the group interaction I feel the factors that came across which made my interaction effective was the way in which I spoke out in the group to make my point clear to the  other professionals, this also broke the barrier of silence between one another and this brought the others to speak out and share what they feel would be best so I felt that I was an influence on the group here. As a group I feel are strength was that we had good eye contact with one another when speaking which made us realise that we were all listening and interacting so therefore it kept the conversation going. We expressed our thought on things that we felt were negative and explained why so that we understood why we shouldn’t do certain things in certain ways. I feel that I had good use of body language in the group as I sat up straight when speaking and used hand gestures to bring the others to understand more about what I was explaining. Also I feel that my use of nodding my head to indicate that I agree with what people were saying was a good effective interaction as then people in the group knew that I was keeping on track with what they were saying and understood. Also the way in which we worked effective as a group was the way in which we were all aware of the needs and preferences of Mrs.Signh so that we understood about her past and therefore could go straight into what we are going to do with her. I also feel that I made the communication and interpersonal skills effective in the group due to asking questions in order to verify things so that I understood them correctly so that no faults in the system occurred when the meeting was over, as if we go the wrong idea about something then Mrs.Signh’s health may be at risk. In this meeting jargon was used due to it being with 3 professionals in the same profession of health care so they therefore understood the jargon used in the conversation as it was medical terminology. This helped us understand certain aspects of her health in more depth. I also feel that an effective way of communication in the meeting was that we respected each other’s opinions on Mrs.Signh and then came to a conclusion as a group with the final decision, also if we did not feel that someone else’s thoughts were very good we did not put them down we just suggested how we could improve them. I also feel in the meeting that I had a good clear voice with a calm tone so that the meeting stayed at a calm level and stopped it from becoming an intense discussion when disagreements on the care plan occurred, as an intense discussion could of lead to an argument and that would not have been professional. This also helped the other people in the group understand me clearly so that there was no miscommunication or  misinterpretations as these could of lead to the wrong inappropriate care plan which may not have benefitted Mrs. Singh. Ways to improve the meeting as a group in order to gain more effective communication and interpersonal skills may be to not rush the meeting as much as we did and to make it go on for longer stating more information in it. Also we could have introduced ourselves and our care profession at the start of the meeting and shook one another’s hand showing courtesy and politeness. Other ways which we could of improved it is by not having our coats on and so that we are more comfortable and can move about easily for use of good body language. Another way which we could have improved it in our group would be by sitting in more of a closed circle so that we can hear one another efficiently and can see each other clearly in order to see body language and facial expressions. This will help make communication effective and avoid misinterpretations so that no mistakes in the meeting are made. I feel that I could of improved the way that I acted with the group as I feel that I took a direct approach which made me out to be the main person/leader of the group who was in charge due to be speaking up and setting up the topic for discussion. By speaking up in the group with my opinions this may have made the others in the group shy and they may not feel as confident in expressing their opinions. Therefore I would improve this by making it all equal between one another so that others feel that they are on the same level and can speak up and say what they would like to discuss. References: – Robinson, L Segal, J . (2012). Effective Communication. Available: http://www.helpguide.org/mental/effective_communication_skills.htm. Last accessed 17th October 2012. – Skills you need . (2011-2012). Interpersonal Communication Skills . Available: http://www.skillsyouneed.co.uk/IPS/Interpersonal_Communication.html. Last accessed 17th October . – Stretch, B Whitehouse, M (2010). Health and Social Care Level 3 Book 1. England and Wales: Pearson Limited Education – Collins Education . (2011). Developing effective communication in health and social care. Available: http://www.collinseducation.com/resources/hscbtecnationalch01.pdf. Last accessed 17th October 2012.

Definition of Qualitative Analysis in Chemistry

Definition of Qualitative Analysis in Chemistry In chemistry, qualitative analysis is the determination of the chemical composition of  a sample. It encompasses a set of analytical chemistry techniques that provide nonnumerical information about a specimen. Qualitative analysis can tell you whether an atom, ion, functional group, or compound is present or absent in a sample, but it doesnt provide information about its quantity (how much). Quantification of a sample, in contrast, is called quantitative analysis. Techniques and Tests Qualitative analysis involves chemical tests, such as the Kastle-Meyer test for blood or the iodine test for starch. Another common qualitative test, used in inorganic chemical analysis, is the flame test. Qualitative analysis typically measures changes in color, melting point, odor, reactivity, radioactivity, boiling point, bubble production, and precipitation. Methods include distillation, extraction, precipitation, chromatography, and spectroscopy. Branches of Qualitative Analysis The two main branches of qualitative analysis are organic qualitative analysis (such as the iodine test) and inorganic qualitative analysis (such as the flame test). Inorganic analysis looks at the elemental and ionic composition of a sample, usually by examination of ions in aqueous solution. Organic analysis tends to look at types of molecules, functional groups, and chemical bonds.Example: She used qualitative analysis to find that the solution contained Cu2 and Cl-  ions.

Steve Invasive Species and Hallow Stems Essay

Steve Invasive Species and Hallow Stems Essay Steve: Invasive Species and Hallow Stems Essay Invasive species are plants or animals that are introduced to other environments of their own. These species cause adverse effects of the habitats they invade on an environmental, economical, and ecological level. They threaten biological diversity and can upset the balance of living things in nature. Look for example at Human Beings, we are a major invasive species to many areas of the Earth we occupy. We have destroyed many other life forms both plant and animal, just as any invasive species can do to the environments they are introduced into. Fallopia japonica(Japanese Knotweed) for example is an invasive plant species. It is a perennial of the family Polygonaceae which is native to Eastern Asia. This plant has hallow stems and has a resemblance to bamboo even though the two species are not closely related. It has a very invasive root system and it can damage buildings, roads, and most other manmade structures. In some areas its even possible this plant can reduce the capacity o f flood channels that carry floodwaters away. Is it feasible to say that these plants killed someone? Would the difference in the flood channels ability to carry water from these plants be capable of making such a negative difference? This plant forms extremely thick and dense growths that crowd out much of the surrounding plant life. It has great success growing in a variety of soil types. Another eerie fact is the rhizomes() can survive temperatures of -31F and can extend 23 ft horizontally and nearly 10 feet deep. This would create an extremely difficult task to remove if it threatened any buildings or other plant life you had concern for. To obtain an understanding of the effects of this particular invasive plant, we must first understand its uses and why anyone would contribute to the success of this bad plant. One reason being that Japanese knotweed is used in beekeeping as an important source of nectar for honeybees. They are used mainly in times of the year when many other species are not flowering. The honey yielded is a monofloral honey, which means that the honey is derived from one plant species and has a distinct taste. Secondly the young stems that grow are edible as a spring vegetable which has a flavor similar to sour rhubarb. Lastly this plant is known for its high concentration of resveratrol and flucoside piceid. This means it can replace certain grape byproducts. It is useful in this way even more because its year round growth and its ability to grow in many climates. The best way to control this weed is to use some form of

Who Should Get a Graduation Announcement

Who Should Get a Graduation Announcement Different degrees take different amounts of time to complete, which means it can be hard for your friends and family to keep track of just when youll be receiving your diploma. Sending graduation announcements can be a fun and exciting way to let everyone know you finally reached your goal and will soon be an official college graduate. But who exactly is everyone? After all, there are only so many announcements you can buy, address, and stamp.   While family and friends are a good place to start, remember that there is no official right or wrong list: only the right or wrong list for your particular situation. Immediate Family Members For some students, parents and siblings are their primary support network during their time in school. And even though parents and siblings may know the date and time of your graduation ceremony, make sure they receive an official announcement so that they have something tangible to mark and commemorate this important occasion. Extended Family Grandparents, aunts, uncles, and cousins whom you may not see every day, but who are a part of your life, will be excited to receive your graduation announcement. Even if they are too far away to attend the actual ceremony, theyll want to know the details and see the official announcement. If there are people beyond blood relatives you consider family, you might want to add those important people to your graduation announcement list as well. Childhood Friends Clearly, you dont need to send announcements to your friends on campus, but close friends from your pre-college days or those who live far away might want to see your announcement and send you a congratulatory text message. Important Teachers, Religious Leaders, and Mentors Did you have a high school teacher who really made a difference in your life? A pastor or spiritual leader who helped encourage you along the way? Or perhaps a family friend who mentored you and helped you to get to where you are today? Sending an announcement to these important people is a great way to acknowledge all they did as well as show them how much their influence really made a difference in your life. Graduation Announcements vs. Invitations A graduation invitation is an invite to the ceremony held by your school. On the other hand, a graduation announcement provides details about your degree and achievement, without inviting recipients to the ceremony. Most colleges limit the number of people students can bring to the ceremony, so graduation announcements serve the purpose of keeping your extended family informed without extending a specific invitation. If you are hosting your own graduation party separate from the ceremony, you can include party details in your graduation announcement. While many students receive gifts from friends and relatives for their graduation, the proper etiquette is to include a line in your announcement stating that presents are not required.

Gang Research Review Term Paper Example | Topics and Well Written Essays - 1250 words

Gang Research Review - Term Paper Example and Meeker were able to find effective claims regarding the truth behind the reaction that the youth has on the changes happening in the society today. Truthfully, the world to which the youth grow up to today is a major presentation of worldwide liberation (458). A matter of concentration that is focused upon making amends as to how to teach the youngsters to be disciplined while actually let them live a life that they want is one of the highest concerns of the public today. Apparently, being born to a society of liberalization has made it harder for many youngsters today to actually see the real importance behind the truthful effects of freedom in their lives. No matter, the situation of the current society still suggests that there are still other reasons that could be pinpointed as to why and how gangs develop in the society. In the discussion that follows, one of the most important factors that brings about the possibility of gang developments in the society, peer pressure, shall be further discussed and clarified. The study of Cindy Ness (2004) on Why Girls Fight gives an evident source of understanding as to how and why gangs are receiving a warm welcome among the young communities today. According to this study, the researchers in the past felt that they had it all figured out. They had intently examined 200 children from their infancy through adolescence. They analyzed the parents, the home environment and the disposition of each child. Then they predicted which of these children would become happy adults. It seemed simple—a happy childhood under a pleasant family environment would produce a happy adult. After waiting till the children became 30 years of age, they re-interviewed them. This interview showed how girls and boys differ in their views towards their peers and how they view the acceptance given to them by the group they ought to belong to. (33) In connection with the study of Jodi Lane and James Meeker’s Fear of Gang Crimes, Cindy

Human Rights Act 1998 Essay Example | Topics and Well Written Essays - 3250 words

Human Rights Act 1998 - Essay Example However, the Government also declared that there was no intention to provide a basis for striking down any portion of it. Nevertheless, the judiciary has been empowered to rescind secondary legislation that does not comply with the provisions of the European Convention on Human Rights.2 Exceptions to this principle arise when the parent statute does not permit such repealing. Legislation has to be interpreted, to the extent possible, in a manner that renders it compatible with the European Convention on Human Rights. This is the purport of Section 3 of the Human Rights Act 1998. However, Section 4 of this Act states that if the court concludes that such interpretation is not possible, then a formal declaration of incompatibility can be made by the court. 3 The law does not undergo a change, nor does the litigant win a case, on account of a declaration of incompatibility. However, such declaration should result in a dialogue with the Government, which in turn could result in the law b eing changed appropriately. The Human Rights Act 1998 provides an expeditious procedure for revising legislation, if there is a declaration of incompatibility. This is as per the provisions of Section 10 of the Human Rights Act 1998. ... However, they also permit the courts to undertake constitutional review, and this is akin to the powers made available to the Supreme Court of the United States of America. There are several important facts that are to be taken into consideration. 6 The first of these is that all final declarations of incompatibility either have been addressed by the Government of the UK or are in the process of being resolved. Despite delay in some instances, there is not a single instance, wherein the Government has ignored an issue or declared that it would not remedy it. This makes it politically impossible to challenge the courts in the UK. In addition, the Human Rights Act 1998 involves the latent additional legal cost of an application to the European Court of Human Rights. 7 Another important fact to be considered is that the courts consider Section 3 of the Human Rights Act 1998 to consist of an interpretive duty that is very strong and which constitutes the principal remedy for the violatio n of rights under this Act. This has reduced the reliance of the courts on Section 4 declarations of the Human Rights Act 1998, which constitutes the primary structural vehicle of the legislature. In addition, the courts have effectively made Parliament to comply with the rights provided by the Convention. Moreover, the courts have interpreted Section 3 of the Human Rights Act 1998 that transcends the rewriting of statutes.8 This has rendered it a unique technique for safeguarding rights under the Human Rights Act 1998. In addition, Section 3(1) of the Human Rights Act 1998, declares that to the extent possible, all legislation must be interpreted and given effect in a manner that is compatible with the rights provided by the Convention. It is important to realise that the rights provided

Individual Reflective Journal Assignment Example | Topics and Well Written Essays - 250 words

Individual Reflective Journal - Assignment Example If such methods of learning are implemented by students of marketing, they can research various organizations that are currently operating and they way these organizations devise their marketing programs and how these marketing programs have assisted them in surviving competition and meeting the needs and wants of the customers in an effective manner. Dissertations can help students identify how organizations make their marketing decisions and marketing strategies and can verify the effectiveness of the strategies that are being taught to them during their marketing courses. For example: students are taught that successful marketing strategies are those in which first research about consumer demand is conducted and then the product is made to fit to the demands of the consumers. The students can research organizations that have implemented such strategies and differentiate them from those organizations that first produce the product and then conduct marketing campaigns. This differen tiation will allow students to differentiate between the two

Selection - A Function Within HR Research Paper

Selection - A Function Within HR - Research Paper Example Companies at times may bear huge cost by making a wrong hire decision. It is through good selection methods organisations can restrain their hiring decision. Good selection method also prevents the organisation from making wrong investment and therefore provides the organisation confidence regarding the fact that they are making the correct hiring decisions. The most significant point to consider is that organisations need to pay due consideration towards their main objectives when hiring the candidates. It is through best practices in the process of selection that can enhance the efficiency of the organisation (Hudson Highland Group, 2011). Selection is not only concerned regarding the choice of the right person at the right place but also it aims at maintaining and enhancing the performance thereby improving the rate of retention of the employees and increasing job satisfaction. For the purpose of achieving these objectives, the managers who are responsible for hiring the candidate s are confronted with the candidates possessing numerous characteristics and competencies. It is the duty of the hiring manager to decide the use of the tool that can be used for the selection process in order to reach to the best possible examination of the various candidates. Therefore, it becomes significant to consider the reliability of the selected instrument so that a robust outcome of the selection procedure can be guaranteed. Selection tools predictive validity needs to be paid due attention so that there is best possible forecast of the success of new hires (Hudson Highland Group, 2011). Best Thing to Do To Make Selection Work Selection can be identified as the procedure through which individuals possessing the correct qualification are chosen in order to fill the vacant position of the organisation (Mathis & Jackson, 2010). Selection of candidate for a particular designation signifies hiring a person who can be a contributing factor in the achievement of goals of the orga nization. Whatever be the designations, it is quite significant for the organisation to implement the similar standards of selection so that the effectiveness is enhanced. The companies need to employ best practice selection methodology in order to ensure that the candidate selected is fully profiled and therefore matched with the assignment criteria in terms of functional skills, personal attributes and attitudes, organizational culture and sector experience among others. In order to make selection work, it is quite significant for the companies to make extensive and appropriate use of the database search. The database needs to be of high quality and needs to be updated on a continuous basis. The companies need to focus on quality rather than quantity of candidates. Offering proper training to the line managers or selection team who are involved in the process of recruitment can also aid them in conducting the selection of the candidate as per the set objectives (Daltons Kingswell, 2005). It is to be remembered that a good selection process is one which does not involve any kind of illegal unfairness in the context of gender, disability, age, sexual orientation, race and religion or belief. It is also significant for the selection team to keep themselves updated with the changes in the labour market (Acas, n.d.). Selection Based on Job Analysis Selection is the procedure of choosing the applicant from a

Micro economics assignment Fuel Essay Example | Topics and Well Written Essays - 1500 words

Micro economics assignment Fuel - Essay Example The graph shown on the left shows the above mentioned change in demand of corn. Previously, the demand for corn stood at D1 because it was almost solely used for food consumption. However, the demand for bio-fuel has added to this demand and an addition of D2 has resulted in an overall demand of D1+D2 for corn. Along with showing the total demand for corn, the graph also shows the rise in price of the product which is corn in this case. The previous demand of D1 had a lower price but due to the increased demand, an upward pressure on price has forced the price to rise to PC*. In a market economy, if the increased demand is not addressed by added production and hence increased supply, then the prices rise because the market forces come into play and determine the market prices which are at a higher point (AmosWEB n.d.). The graph here shows that the supply has been unchanged due to which the increased demand has resulted in a rise in the prices of corn. ii) The price of a product usua lly tends to go up if the increase in demand is not met by an increase in the supply in the same ratio. However, when the demand rises and the prices start to go up, then it tempts others to invest in improving the production methods by introducing new technology or new producers enter into the market. When this happens, the supply of the industry rises and the supply curve of the industry shifts outwards which results in the fall in prices (AmosWEB, Supply and Demand Increase n.d.). The supply of product that is under consideration cannot be increased simply because it is an agricultural product and therefore numerous limitations such as the availability of agricultural land suitable for the growth of crops. In this case when the product is an agricultural product, then the options left to increase the yield of crops is to improve the agricultural and conversion technologies. During harvesting, the conversion process usually results in wastage of product. Therefore if there is an i mprovement in the conversion technology, then there will be less wastage and increased supply. Similarly, if the seed quality can be improved, then it will result in an improved yield. Both of these steps will lead to a rise in the supply of corn and as a result of an outward shift in the supply curve, the price will fall. Here in the graph on the right, the supply curve has shifted outwards as a result of increase in supply. In our context, the increased supply is the improved yield of corn. The increase in corn has resulted in the readjustment of the equilibrium point and the price at this point has gone down. Therefore, an increased demand can be handled by a simultaneous increase in supply to keep the price under control. iii) After raising the concerns that the earth is facing the possibility of environment and resource depletion, there were calls of innovating and moving towards environment friendly energy solutions. These calls were answered by the introduction of bio-fuels w hich are partly renewable and emit less dangerous gases. Due to this, many have shifted their consumption to the bio-fuels and it has emerged as a dominant and growing force in the oil industry throughout the world. (Analytica n.d.) The bio-fuels have added to the competition in the oil industry and manufacturer companies now face a greater challenge with

Selection - A Function Within HR Research Paper

Selection - A Function Within HR - Research Paper Example Companies at times may bear huge cost by making a wrong hire decision. It is through good selection methods organisations can restrain their hiring decision. Good selection method also prevents the organisation from making wrong investment and therefore provides the organisation confidence regarding the fact that they are making the correct hiring decisions. The most significant point to consider is that organisations need to pay due consideration towards their main objectives when hiring the candidates. It is through best practices in the process of selection that can enhance the efficiency of the organisation (Hudson Highland Group, 2011). Selection is not only concerned regarding the choice of the right person at the right place but also it aims at maintaining and enhancing the performance thereby improving the rate of retention of the employees and increasing job satisfaction. For the purpose of achieving these objectives, the managers who are responsible for hiring the candidate s are confronted with the candidates possessing numerous characteristics and competencies. It is the duty of the hiring manager to decide the use of the tool that can be used for the selection process in order to reach to the best possible examination of the various candidates. Therefore, it becomes significant to consider the reliability of the selected instrument so that a robust outcome of the selection procedure can be guaranteed. Selection tools predictive validity needs to be paid due attention so that there is best possible forecast of the success of new hires (Hudson Highland Group, 2011). Best Thing to Do To Make Selection Work Selection can be identified as the procedure through which individuals possessing the correct qualification are chosen in order to fill the vacant position of the organisation (Mathis & Jackson, 2010). Selection of candidate for a particular designation signifies hiring a person who can be a contributing factor in the achievement of goals of the orga nization. Whatever be the designations, it is quite significant for the organisation to implement the similar standards of selection so that the effectiveness is enhanced. The companies need to employ best practice selection methodology in order to ensure that the candidate selected is fully profiled and therefore matched with the assignment criteria in terms of functional skills, personal attributes and attitudes, organizational culture and sector experience among others. In order to make selection work, it is quite significant for the companies to make extensive and appropriate use of the database search. The database needs to be of high quality and needs to be updated on a continuous basis. The companies need to focus on quality rather than quantity of candidates. Offering proper training to the line managers or selection team who are involved in the process of recruitment can also aid them in conducting the selection of the candidate as per the set objectives (Daltons Kingswell, 2005). It is to be remembered that a good selection process is one which does not involve any kind of illegal unfairness in the context of gender, disability, age, sexual orientation, race and religion or belief. It is also significant for the selection team to keep themselves updated with the changes in the labour market (Acas, n.d.). Selection Based on Job Analysis Selection is the procedure of choosing the applicant from a

Hormone Replacement Therapy Essay Example | Topics and Well Written Essays - 500 words

Hormone Replacement Therapy - Essay Example This is usually referred to trans-women or trans-men (Manson, 2010). Cancer in recent years have been a worldwide problem, initially people believed that this life style disease was majorly for the wealthy and the able people, but recent researchers find that the disease affects anybody irrespective of a race one belongs to. Most treatments of cancers for instance the prostate cancer in men and menopause conditions in women as well as uterine cancer are based on hormone replacement therapy ( Chlebowski, Anderson & Manson, 2010). Resent researchers claim that replacement therapy in early menopause had a significant reduction of mortality, heart attacks without risks of cancer and stroke. As situation where estrogen stimulates the growth of lining of the uterine walls which increase the risk of uterine cancer; a prescription of estrogen in combination with progesterone is given to reduce the problem. Reduction of risk of endometrial cancer: Studies indicate that women who receive progesterone as well as estrogen treatment to decrease menopause symptoms reduced risks of endometrial cancer as compared to those who were under only estrogen (Manson, 2010). Evidence based research requires demonstration of a new practice which emphasizes on quality and safety of patients for instance; a use of empirical evidence from randomized controlled specimen, qualitative scientific research methods, information reports combined, results to a more relevant and concrete solution or step in controlling problem associated with hormone replacement therapy (Hjorland, Birger, 2011). The use of evidence increase patients’ outcome since it includes healthcare recommendations that help doctors and nurses address questions related to cancer and hormone issues (Hjorland, Birger, 2011). Though there have been successes in the effective administration of drugs or Hormone Replacement therapy especially to women, various side

Healthcare Interview Essay Example for Free

Healthcare Interview Essay Introduction This paper is based on a conducted interview of a licensed employee of Larkin Community Hospital. This paper will include an overview of Larkin Community Hospital. It will describe the targeted department, type of work conducted in this department, and specific information that makes it unique. Furthermore, this paper will describe all responsibilities in care and will consist of questions answered by the interviewee. Overview of Larkin Community Hospital Larkin Community Hospital severed as a general hospital for those patients who in need of surgical and medical care. Larking Community is a physician-owned, acute care in bed hospital accredited by Joint Commissions. In this facility, patients will have safest and compressive care at its best quality. This facility offers a variety of services which include bariatric care, cardiology, dental care, emergency care, family practice, memory disorders, occupational health, outpatient and inpatient care, podiatry and foot, pulmonary care, mental health, surgery, and healing. It accommodates residential patients who suffer from physical or mental disabilities. As part of the Graduate Medical Education Committee, it teaches healthcare professionals of all aspects of care by monitoring and reviewing all healthcare decisions. The hospital will also implement and implement policies to ensure regulatory compliance is in order in regards to residents. Targeted Department The targeted department is the section where patients need more assistance; this is what makes facility different from the rest. In this section, resident assistance is available all hours of the day. All of the employees are trained to provide adequate care. All resident aids are first aid and CPR certified. Resident aids are available to provide ambulatory care when need for the patient. Because more care is provided in this section, there are more resident aids on the floor to make certain that all needs are fulfilled. Interviewee The person been interviewed is Ira Agastein, a resident supervisor of Larkin Hospital Community. His responsibilities is to make sure that residents are getting appropriate care by performance evaluations, make certain residents receive their medication when needed, and handling complaints by patients or their families. Agastein is in charge of enforcing implications of action plans that are developed to improve operation efficiency. As the resident aid supervisor it is his responsibility to ensure that employees (resident aids and resident aid manager) carry out their assigned duties. This will guaranteed that the department continues to improve and continue to provide the best quality of care to the patients. Career Path When asked what about his career path was, Agastein said it was to become a resident aid supervisor. Agastein began his career working as a combat medic in the Army National Guard. After a few years, he went to medical school to earn his bachelor degree in psychology. He began working shortly after his commissioning in the Army. After working in this position for 5 years, he began to shadow the resident manager learning the responsibilities of this position. A few months afterwards, he was promoted to resident manager. He knew that he wanted to go further so he began to learn the responsibilities as a resident aid supervisor. When the position was available he applied in hopes of getting the job. Because of his years of experience and acquired knowledge he was given the position. Although it can be overbearing at times, Agastein seems to love his job very much. Educational Requirements What are the educational requirements for the position? Agastein replied that there are some requirements for education where he had obtained a bachelor degree to get this position, which he did for psychology. While he was in medical school, he had to understand mental behaviors and theories relating to children and young teens. He had to deal with families suffering domestic violence and substance abuse. Also he had to working with people coming from socioeconomic and cultural backgrounds. He needed to be able to withhold the knowledge of a resident supervisor, which got him in his current position today. Did your education adequately prepare you for your job? When asked this question Agastein said that without a doubt that his formal education in medical school had prepared him for this job. Since he had worked his way up through the ranks, from enlisted to commissioned he had seen all the aspects of leadership and he was well prepared to be put into a supervisor position. What would you say is the most important attribute for success in this position? Communication is the most important part of success in any position. Agastein said that from the janitor to the director if there is no communication everything will shut down and the business will not function. With his success in her current position he says that he has learned that throughout his entire career that communication was always what got his where he wanted to be. Another attribute that he attributes to his success is good old fashioned hard work. He says that he has always had to work hard and study a lot because good grades and success in education did not come as easy to him as it did for some of his colleagues. He had to study a lot and not sleep very much through medical school but he was able to pass in the top ten percent of his class. Hard work and dedication pays off well. Conclusion Ira Agastein a resident supervisor of Larkin Community Hospital, loves every aspect of his job and feels that he is right where he needs to be in his career path. He loves working with people and being able to make sure that they are all taken care of in a way that he says would make his grandfather proud. As a 18 year service veteran as a combat medic, he looks forward to retiring from the Army in the near future but he says he probably will never leave the health care field. He has done a lot of things in his 18 year career with the army and done other things, he has spent a lot of time on his education and says that here time in medical school was all worth it. Health care is something that he love and is very good at there is nothing else he would like to do more.

The Evaluation And Selection Construction Method Of Smart Construction Essay

The Evaluation And Selection Construction Method Of Smart Construction Essay Malaysia is a rainy season country especially from November to March it will have heavy rainfall during this period. Unfortunately our capital Kuala Lumpur (KL) is located at the valley positions which frequently happen flooding problem since according to (Sin Chew Daily 2011) started from 31 December 1970 years three quarter of the city were flooded during rainy season. The flooding problem will cause the develop of our country. The impact involved of damages the lives of human, effect the economic use of the land such as the cost of land will be low because none of the owner would like have the land which frequently faced flood problem and also the structural damage such as the maintenance cost or the repair cost. Take an example according to (Datuk IR Hj) about 445 hectares of land in the city were inundated to various depths of up to 2 meter and the cost of damage was estimated to be region of RM 36 million, it was a huge amount if the problem continue for feature. Therefore Mala ysia government have come out with a solution which is invested in a program call smart tunnel project or Stormwater Management and Road Tunnel project. According to (Siao 2003) The smart tunnel project are located nearby the confluence point of Sg.Ampang river and Sg Klang river in the north and ends at the lake at Desa Water Park .The total tunnel length is 9.7 km with a bore diameter of 13.26m. The usage of smart tunnel is to solve the problem floods in Kuala Lumpur and also reduce traffic jam along Jalan Sungai Besi and low yew at Pudu during rush hour; therefore there are two components of this tunnel, the StormWater tunnel and motorway tunnel. It is the longest multi-purpose tunnel in the world. 1.2 Background The Stormwater management and road tunnel is located at the eastern side of Kuala Lumpur in a north east-south west direction. Due to the geographical environment of Kuala Lumpur are located at the valley it will stagnant water more easily and our rivers today do not have the capacity to discharge the water to another place cause Kuala Lumpur suffered serious damages during the flash flood from years 1970 until now. Accroding to(Smart project 2012) That may the reason the government come out with a solution that is smart tunnel project, the idea of smart tunnel is to decrease the flooding problem that Kuala Lumpur is face up to each time of heavily rain by divert the water entering from the critical location which is Sg.Klang,Sg.Ampang and Sg.Gombak using a holding basin ,storage reservoir and the bypass tunnel and reduce the traffic jam during rush hours in Kuala Lumpur .(Stormwater management and road tunnel project .viewed on 19 June 2012. The Smart Tunnel project was initiated by the former Prime Minister Tun Dr. Mahatir Mohammad under the Malaysian development. This project is included of cooperation of local authorities, private sectors, and some international engineer consultant. For the government department involved in this project are the department of irrigation and drainage Malaysia and Malaysian Highway Authority. For the private sectors are MMC Berhad and GAMUDA Berhad . The site of Smart tunnel ground condition which consisting overburden (siltssand,alluvial tin deposits, mine tailings,slump zones over the karstic rockhead) and the limestone which are deep fissured erratic Rockhead with relief of >30m . Due to the complex ground condition the contractor of smart tunnel project have decide to use tunnel boring machine as tunnelling excavation method and few part by using cut and fill . 1.2 Problem statement and Research question The smart tunnel is consisting of two components 9.7 km route and 11.83 internal diameter was in part sized to provide a motorway and storm water tunnel, there was a problem from the different level of motorway due to when flood event whether the component of the road provide sufficient strength to support water load to transmit water throughout the tunnel. (Robert Wilson 06) The another problem of this study is smart tunnel located in Kuala Lumpur which consists of large amount of lime stone know as highly erratic karstic features. (siow 2006) because of the formation there are few difficulty problem during the excavation process there are included the earth retaining system for the shaft excavation , the selection of the suitable tunnel boring machine (TBM) for SMART project, the ground water inside the ground. The smart tunnel project completed at end of January 2007 and started with the operation mode of storm water tunnel but however the Malaysia government has allocated a huge amount of money for flood control project drainage system in smart tunnel project but the smart tunnel is unable to curb flood in Kuala Lumpur flood hit after a few days of downpour 40 years ago but today, the nightmare return after an hour of heavy rain .Is it because the river getting slimmer. (Sin Chew Daily 2011). According to(The Star 2012) There are few selected flooding area even the smart tunnel are operating but it did not solve the flooding problem in those area like KampungBaru,Ampang, Jalan Bangsar,Ampang Jaya, Jalan Pinang and Jalan Sultan ismail. 1.2.1Research question How the excavation method is carried out? What is the major excavation problems occurred? How the operation mode is functions? What the selection characteristics have to be considered for tunnel boring machine? 1.3 Objective To study the excavation methods of smart tunnel To analyse the major problem during excavation To ascertain the mode of operation stage for smart tunnel To compare the selected tunnel boring machine with alternative (TBM) 1.4 Scopes of study The scopes of study are as follow: Due to the smart tunnel location the study for this topic will be conducted in the area of Kuala Lumpur, and the area will be focus on those area involved flood problem there are Kampung Baru, Ampang, Jalan Bangsar, Ampang Jaya, Jalan Pinang and Jalan Sultan Ismail. Furthermore to study the excavation method that only applied in the construction of smart tunnel and also the ground soil condition of the smart tunnel. After that will be study on the selection characteristic tunnel boring machine, lastly is the 3 mode of operation of smart tunnel 1.5 Research Methodology Introduction This section usually is to presents an overview of the process and method to use in the study of the topic and the aim of this study is to collect information such as what is the excavation selected method of smart tunnel, during the excavation what are the major problem occurred, how the operation mode is functioned and the consideration of characterise during selection of tunnel boring machine. 1.5.2 Primary data source Questionnaire and Interview The research that I am conducting is a plain research, which intends to find out the information of why the flooding problem is still occurring and the consideration while selecting the construction method. I am going to collect primary data through survey method by using both questionnaires and interviews. The reason for combining both questionnaire and interview methods is to collect both quantitative and qualitative information from respondents. Besides, collecting data through the survey method is quicker and economic. .By utilizing the questionnaires and interview in this research I able to comprise both the quantitative and qualitative methodologies. The purpose of the interviews is to obtain an insight into the respondents. This methodology will enable me to acquire more complete picture of respondents understanding of the smart tunnel and processes by them to produce answers. The main idea is let the respondents to make judgments based on the question. Paper and pen will be p repared for those respondents which will be held separately at different times. For questionnaires, I will be targeting 100 respondents, which consists of the public field member from age 20-60. Second question from the quantitative paradigm statistically compares data, this technique will be show the scores in the results and enable me to answer the question from the score. 1.5.3 Secondary data source -Literature review The literature review is one of the important processes in order to get more understanding what the construction method was selected. All the review can be collected from the relevant article, newspaper, internet and the references book. Through the review it can develop more understanding on the selected construction method of smart tunnel. The way to collect article and newspaper can be from internet and the references book can be found out a t the college library. 1.7 Outline Chapter Chapter 1 Introduction This chapter is the introduction to explain the reason to develop the smart tunnel project. In this chapter, it will look penetrate deeply to the selected excavation method of smart tunnel, the comparison between selected tunnel boring machine (TBM) with alternative (TBM) and also the mode of operation for Smart Tunnel in order to achieve the aim and the objective of the topic and by suggest of the research methodology to gather the relevant information. Chapter 2 Literature review For this chapter are going to collect the important relevant information from the article, newspaper, data from internet and also reference book from college library. The following information will be list down for understanding for this topic in order to achieve the objective of this topic. This Chapter will be mark down the information as the following: The selected excavation method for smart tunnel. The major problem and the solution during the excavation. The three mode of operation of smart tunnel. The selected tunnel boring machine and alternative tunnel boring machine. Chapter 3 Research Methodology For this chapter it will explain the process of the research, which means the way of the researcher to find out more information and to collect the required data for data analysis purpose. For my method I will go to use interview and questionnaire to achieve my objective. Chapter 4 Data Analysis For this chapter, all the data gathered from the interview and questionnaire will then be analysed after conduct the interview and questionnaires to the relevant manager and the 100 responder from the public field to collected primary data. It will be presented in table and histogram form in order to make a conclusion for this topic. Chapter 5 Conclusion and Recommendation For this chapter it will base on the result obtained and write out the conclusion. Furthermore, base on the 4 chapter that was conducted out to write out the final summary for what have been studied is written. Chapter 2 Literature Review Introduction This chapter will present the general information about the excavation method of smart tunnel, the major excavation problem occurred in smart tunnel, the operation mode of the smart tunnel and the characterise between selected tunnel boring machine (TNB) and alternative TNB. Definition of excavation work Excavation consider is one of a the greatest hazardous and complex construction operations (Western Australia, 2005), excavation can divided to many type they are include of trench, deep foundation ,tunnel , shaft and also open excavation. The excavations describe as by removing the earth soil and formed a hollow or cavity earth surface. 2.2.1 The excavation method of smart tunnel The selection of excavation method of smart tunnel have consider and study by the project promoter MMC-GAMUDA joint venture and their consultants SSP in assocition with Mott MacDonald(SSP/MM) and come out with the result. According to Keizrul(2004) the choice of tunnel excavation method to have three choice there are i.e. cutcover,NATM and TBM . He point out that the cut cover method will take long time during the contraction process either selected method from bottom up or top down .On the other hand this method will be suitable for uncertain soil through the tunnelling. Furthermore according to sivalingam(2006) the meaning of cut and cover method for the smart tunnel are Lformed walls on high rock head part and secant pile walls keyed into the rock and tieback with anchors on part where the rock head drops. The rock was to be excavated by drilling and blasting as in a quarry, the walls supported by rock bolts and concrete. The same method was selected for the excavation of the shaf ts, egress ingress road trenches and of the junction boxes. Furthermore for NATM namely as New Austrian tunnelling .He have point out this method are suitable for the structure of soil to tunnel is completely understood. It will be not suitable to select this method when founded the ground condition are belong to non homogeneous material or cavity filled rock, the drill and blast. For the last excavation method point out by the Keizrul (2004) are TBM namely as Tunnel Boring Machine .The article show that the general type of TBM to pick to have three main function i.e. the open face machine for rock boring, the earth pressure balance (EPB) machine generally used for boring loose soil and the misxshield TBM for media comprising hard material interfaced with loose soil. Furthermore according to sivalingam(2006) The major excavation problem According to (Malcolm Puller, 1996) the common excavation problem will be occurred on site is the excessive deformation of the soil, soil support structure, and inadequate groundwater leaving out and not enough durability and strength of the soil support structure. Those are the major problem maybe occurred during the excavation stage. 2.3.1 The major excavation problem have occurred in smart tunnel 2.4. Operation mode of the smart tunnel The smart tunnel consisting 3 type of the operation mode, the operation mode will be based on the flood condition at the upstream of Klang River and Ampang River. (Mohd saleh santhiman Looi Hong Weei,2006,) Figure_____Tunnel operation mode Figure_____Cross section of the motorway tunnel Mode Name Description 2.4.1 Mode 1 Normal condition In this mode of condition where the motorway of tunnel are allow for the driver to access ,where there are no storm or low rainfall, does not have any flood water will be diverted into the (SMART) system 2.4.2 Mode 2 Most storms In this mode of condition where the motorway of tunnel are still allow for the driver to access and the (SMART) system will be activated, the stormwater from moderate rainfall is diverted into the bypass tunnel at the invert level(lowers segment)of the motorway tunnel. 2.4.3 Mode 3 Major Storms In this mode of condition where the motorway of tunnel will be closed to traffic. The whole tunnel will be used to mitigate the stormwater.Once the flood water level have reach a limit , in a sufficient time will be evacuate all passenger vehicles and automated water gates are activated to occupy the flood water. The anticipated duration of switching to from mode 2 to mode 3 is estimated to be about one hour. After the flood recede, the targeted duration for tunnel reopening is minimum of two days to enable for flood dewatering and cleaning. 2.5 Tunnel Boring Machine Now a days the tunnel boring machine are become popular in the construction industry while the project involved of the tunnelling process, compare with the traditional excavation method by using the tunnel boring machine the excavation process become safer, and economic for creating underground space. There is different type of the machines an example for hard ground tunnelling will be use slurry machine and rock machine, for soft ground tunnelling will be use earth pressure balance machine. (IMIA Conference Istanbul, 2009) The main function of the tunnel boring machine is to excavate tunnel with the machine and across and remove the soil component there are include variety and soil and hard rock. 2.5.1 The characterise between selected tunnel boring machine (TNB) and alternative TBM 2.5.1.1According to the (MMC-GAMUDA JV, 2009) following is the based criteria for the smart tunnel: General Geotechnical 1)The delivery time of smart tunnel must be short ,not more than one year time in order to prevent the delay of the contract program 1)The tunnel boring machine should able to process excavation under the following situation: 2) Due to the ground condition are complex the smart tunnel must be design and build to survive along the drive. 2) -The tunnel consist 70% of Limestone formation namely as marble. -The North end consist 25% of full face mine tailings -5% of the tunnel in Kenny Hill formation 3) Large, 12,25m excavation diameter 3)High groundwater table close to surface 4) )Able to negotiate tight R=200m curves; tunnel design R=250m curves 4) Extremely high permeability at open karsic solution channels 5) Low overburden: Minimum0.9D, Maximum 1.5D 5) Below of rockhead the slump zone are in the overburden 6) The tunnel should affect the environment due to the tunnel is surround the city. 6) Due to the cyclical water table changes or during earthquakes the tunnel naturally occurring sinkholes 7)Restricted access to alignment at 2/3d of the cases for ground treatment 7) Highly variable, pinnacle rockhead causing frequent mixed face condition 2.5.1.2 (TBM) Selection technical comparison points The following table are refer to (MMC-GAMUDA JV, 2009) Description Herrenknecht Hitachi Kawasaki Mitsubishi NFM General 25 14 13 6 24 Cutter head 85 53 57 33 72 Drive 65 63 50 43 62 Shield 44 30 27 21 29 Segment Handling 35 22 24 20 35 Probe drilling 10 7 7 6 12 Manlocks 17 16 8 8 24 Trailer 26 18 18 12 26 GuidanceMonitoring 44 28 31 27 42 Service 75 53 40 41 78 Slurry system 49 41 43 37 55 Total 475 345 318 254 459 Due to the higher mark and the price and delivery time is most suitable for the smart tunnel project therefore the project team have selected the Herrenknecht machine for tunnelling part. 2.5.1.3 The selected tunnel boring machine C:UsersJackyDesktoptbm.jpg Figure__ showing the cross section of the herrenknecht tunnel boring machine The characterise of the herrenknecht tunnel boring machine as following table are refer to (MMC-GAMUDA JV, 2009) 1)Cutter head diameter 13.260mm Length of shield: 10.245mm 2)Drive 4.000kW hydraulic Weight of shield: 1.500t 3) Rotation 0-3rpm Thrust cylinders: 48nos 4)Displacement thrust force:28.9KN Max.thrust 94.5KN 5)Length of machine:71m Grout line:8nos 6)Two trailer cars on haunch rails Guidance:VMT SLS-APD 7)Weight of machine: 2.500t Tailseal: 3ros,wie brushes Disc cutters:76 Nos 2.5.1.4 Special features of the Herrenknecht tunnel boring machine According to the (MMC-GAMUDA JV, 2009) there are few special feature of the herrenknecht tunnel boring machine there are include as following: The Spherical main bearing are able to negotiate tight up to minimum R200m curves By using herrenknecht tunnel boring machine the movement along the drive are easier to cutter replacement due to the cutterhead retraction up to 400m by axial displacement. Articelated tailskin to negotiate to tight curves The tunnel boring machine is able to detect the karstic features and mixed face condition by using the cutter head tilt moment indicator. Two probe drilling rigs in fixed downward looking position, mounted on the erector the rig could drill through any port in the skin.2.5.1.3 The selected tunnel boring machine Summary

False Consensus Effect :: essays research papers

False Consensus Effect: A Focused Review of Research Categorization and social projection are important ways that people can more successfully navigate their social environment. People need to know that there are others in their in-group that share the same attitudes and behaviors as they do. If people are unable to determine how many people in their environment share their attitudes and behaviors, it would be more difficult to engage in social situations without offending or contradicting others. For this reason, false consensus is an interesting offshoot of this important idea. The false consensus effect refers to the fact that people have a tendency to over-estimate the proportion of the population that shares an attitude or behavior with him or her. Much of the research on false consensus has demonstrated that people tend to over project how many members of their in-group are likely to share their attitudes and behaviors. This effect diminishes when comparing to an out-group. It is thought that this occurs because people feel that people who they do not consider to share a group identity with will likely have different basic attitudes and behaviors than they. An important aspect of the literature is that the vast majority used college students as the primary subjects. While this is extremely convenient for researchers, it may not give us a clear picture about false consensus, in that it is possible that college students' limited "real-world experience" may be influencing their projections. Also, almost all of the behavior measures were taken by self-report. This is somewhat necessary, as many of the behaviors would be difficult to measure directly (e.g., drug use) without a breach of ethics. This too is a source of potential source of error, it is likely that the self-reports would under-estimate the proportion of the population that engages in a particular behavior. The astute reader may notice that this review does not include any papers that did not find a false consensus effect. The reason for this is not that this paper is not representative of the literature, but rather, that it is. The uniformity of the literature suggests that the phenomenon is fairly common. Some interesting arguments as to why this is are motivational or cognitive in nature. The motivational premise is based in the idea that people are motivated to believe that they have a place in their social environment. This argument is a based in self-justification, in that if many people share a given belief or behavior, it makes it easier to justify that this attitude or behavior is either right, or not as bad as it might seem.

Deconstruction in Architecture Essay -- Architects Architecture Physic

Deconstruction in Architecture Deconstruction is first developed by the French philosopher Jacques Derrida. The definition for deconstruction is not easy to understand, and Derrida and his interpreters actually intend it to be difficult. It was first meant a method of interpretation and analysis of a text or a speech. He introduced the concept of deconstruction in connection with his linguistic philosophy and grammatology. When deconstruct a text or a speech, it is to draw out conflicting logics of sense and implication, with the object of showing that the text never exactly means what it ways or says what it means . Though, it has been applied not only to text but also to the visual arts and architecture. The approach of deconstruction in architecture is to get architects to think of things in a new way, to view architecture in bits and pieces. Also to develop buildings which show how differently from traditional architectural conventions buildings can be built without loosing their utility and still complying with the fundamental laws of physics. Especially in 1988, when deconstruction was first promoted in architecture. Different architects of different places seemed to be placing buildings and bits of buildings at odd angles so that they clashed and even penetrated each other. The geometry in these architectures had been set up, but has at least one overlaid and clashed with the other. Also, there are many different kinds of clashes such as: clashes in historic and modern, clashes in plan, clashes in section or elevation, clashes in three dimensions, clashes in grids and clashes in angles. Deconstructionist architecture must start from deconstruct the construction at first, with a name indicates its schemes, its intuition and its concepts, or its rhetoric. Deconstruction also contains an insight of fundamental importance for the historian ¡Ã‚ ¦s conception of what he or she is doing. It uses theory to understand history, and history to understand the theory to construct a more perceptive view of the cultural and social. As deconstructs a structure, it strictly meets the terms of architectural construction and the philosophical construction of the concept of architecture. Therefore, deconstruction is understood to be un-problematically architectural, as it combines with the idea of the system in philosophy, and theory, also the practice and logic ... ...re of architecture. The fundamental idea of architecture consists of primary forms such as cubes, cones, cylinders, and cetera. Although, deconstructionist architecture made clear to the observer that the architecture is an art and not just an engineering discipline, and it is a representation of a material that represent of abstract data. Although deconstructionist architecture does not succeed in the nature of architecture, however, deconstruction is philosophical in the sense that it deploys a distinctive mode of argument in raising certain problem about knowledge, meaning and representation. My opinion on deconstruction is that some of the architecture can be really beautiful but others can be strange. Bibliography  ¡P C. Andreas, Reconstruction Deconstruction, Academy Group LTD, 1989, USA  ¡P H. Kevin, Trespass of the sign: deconstruction, theology and philosophy,  ¡P N. Christopher & B. Andrew, What is Deconstruction, Academy Editions LTD, 1996, USA  ¡P S. Bronwyn, Contemporary Discourse in Interior Architecture and Design  ¡V Unit Reader 2002, Monash University, 2002, Melbourne  ¡P W. Mark, The Architecture of Deconstruction, MIT Press, 1993, USA

Forum Discussion Activities Essay

Please post your response to ONE of the following questions in the Forum by Wednesday, midnight, of Week 3. Then please post at least three responses to other student’s postings by Saturday, midnight, of Week 3. * You are the Vice President of a US based software company. You have been tasked with exploring the possibility of setting up a software development operation in India. You have heard that the rigid caste systems can affect business operations. Do you think it is possible to use a typical US management style in India or should you adjust to the local Indian managerial style and employment practices? Explain. Forum Discussion Week 3 – Question #2 Businesses create strategies for setting up relationships with other countries based upon the type of product involved and whether their entry is in the product market or the resource market. â€Å"Strategy† within this global framework most closely resembles a ‘marketing strategy’ that addresses target markets, segmentation, positioning and allocation of resources. Discuss the various strategies outlined within the text reading and which one or two seem to fit your final project country and product best. Provide a glimpse of your final paper by discussing the product and country you have selected and post and respond to students related to what product you have chosen and whether you are entering in the product or resource markets. Written Assignments Case Study 2 Write a 2-3 page analysis of the Case Study entitled, â€Å"Argentina’s Monetary Crisis† located in Chapter 10 of the text. Upload the paper to the Assignments Drop Box by Saturday, midnight, of Week 3. Course Project: Market Entry Analysis You should have by selected your country and product and begun your environmental research. A learning objective this week is to move from environment to strategy. Outlining your country and product choice, begin a thread on the Forum related to entry strategies as outlined in the text. Elicit comments from your classmates on your choices and begin to formulate your strategy. Learning from this milestone can be incorporated into the final paper due Week 5. * You are the Vice President of a pharmaceutical company that makes anti-malarial drugs. You are looking at the possibility of opening up a factory as a JV with the local government in an African country with high levels of malaria. At present, the majority of people in this country cannot afford the high prices of anti-malarial drugs from outside the country, but by building the plant locally, you would not only provide jobs but also your company could supply anti-malarial drugs to the local population at half the current price. In a meeting with a local government official, you are told that the plant can go forward if you pay the official $100,000 in cash. What are your options and what would you do? My options are to pay the $100,000 or not to pay it based on the company policy. Facilitation payments are still permitted by some countries. We would give the $100,000 to the officials in cash, and then we would also try to negotiate a 5 year tax break. And to recover the $100,000 given to officials, we would charge an extra 15 cents per vaccine sold to recoup the $100,000. We would say the fund is just the price of doing business and setting up relationships outside the US. This bribery is similar to what some city inspectors do when they want to give you a hard time. There has been times where if you didn’t have a nice hot cup of coffee with a $100 bill under it that the inspector would fail you just so you would have to pay another $250 for another inspection. The $100,000 that we would pay as a company could negotiate a vast amount of things per the article below. Interestingly, when the FCPA was initially passed in 1977, the facilitating payment exception was found under the definition of foreign official. However, with the 1988 Amendments, a more explicit exception was written into the statute making it clear that the anti-bribery provisions â€Å"shall not apply to any facilitating or expediting payment to a foreign official, political party, or party official the purpose of which is to expedite or to secure the performance of a routine governmental action . . .† The statute itself provided a list of examples of facilitation payments in the definition of routine governmental actions. It included the following: * Obtaining permits, licenses, or other official documents; * Processing governmental papers such as visas and work orders; * Providing police protection, mail services, scheduling inspections; * Providing utilities, cargo handling; or * Actions of a similar nature. http://tfoxlaw.wordpress.com/tag/facilitation-payments/ You are the Vice President of a US based software company. You have been tasked with exploring the possibility of setting up a software development operation in India. You have heard that the rigid caste systems can affect business operations. Do you think it is possible to use a typical US management style in India or should you adjust to the local Indian managerial style and employment practices? Explain. I would say yes I would use a typical US management style in India. I agree that adapting to India’s culture, managerial style and employment practices are great and would probably be best. But for the very same reason we are expanding aboard and going to India is because our business model has already been accepted by the culture. You only expand to markets if they are the right fit for the company. Bringing something new, innovative and showing India the way that our US company does business may just be intriguing to the country and accepted in ways never seen before; the only thing that matter is if the product sells. McDonalds is a great example; McDonalds is everywhere and consumers shop with McDonalds because the golden arches are known globally, and the business model is a cookie cutter from store to store, nothing changes. Understanding how cultural differences can affect the way in which a business is practiced, Employing local citizens, mixing managerial staff ,educating ourselves about the culture are great and must do’s, but keeping the company’s business model intact and adjusting to the environment is the key to protecting ourselves from the danger of being ill-informed. Business and money are both universal languages and there are more ways to make it work within a proven system than not. Businesses create strategies for setting up relationships with other countries based upon the type of product involved and whether their entry is in the product market or the resource market. â€Å"Strategy† within this global framework most closely resembles a ‘marketing strategy’ that addresses target markets, segmentation, positioning and allocation of resources. Discuss the various strategies outlined within the text reading and which one or two seem to fit your final project country and product best. Provide a glimpse of your final paper by discussing the product and country you have selected and post and respond to students My product selection is infection prevention, innovative sterilization, disinfection and hand hygiene products that will be sold in Canada. * The â€Å"International Strategy† I think would work the best for my product. Medical products and medical technical equipment accounts for $8.8 billion in US export revenue which is ranked number 6 on the list of top exports to Canada from the US. Infection prevention, innovative sterilization, disinfection and hand hygiene products are produced in the US but, are needed worldwide. Currently the US is the major exporter Medical products, medical technical equipment to Canada; also Leading US pharmaceutical companies have production, R&D facilities, and distribution offices in many locations across Canada. Among them are Abbott Point-of-Care, Johnson & Johnson, Pfizer, Novartis, and others. The medical devices industry in Canada is also among the largest in the world. Medical device companies operating in Canada incorporate advanced technologies and the newest discoveries. Our main focus is on helping to ensure the safest possible environments for patients and their families, healthcare workers, providers and communities. Our quality infection prevention products help care for both the people and the world we live in. * The Global Standardization stratedgy is great because the pro that will be sold are all relatively standard, and will be distributed the same way. Customization is not needed to the products themselves, the only thing that will need adjustments is the language, all sterilization equipment, solutions, and products are manufactured the same and have the same technology. http://www.jnj.com/connect/about-jnj/company-structure/medical-devices/ http://www.aspjj.com/us/about/asp-mission-vision http://www.jnj.com/connect/about-jnj/company-structure/medical-devices/ http://www.worldsrichestcountries.com/top_us_exports.html http://en.wikipedia.org/wiki/Johnson_%26_Johnson http://www.canadafaq.ca/what+are+the+top+industries+in+canada/ I am selling a pacemaker in Australia. The â€Å"International Strategy† would be the best for my product. It is produced in the US currently and does not need customization to sell in Australia. Pacemakers fulfill a universal need. Australia imports 85-90% of medical devices. Currently the US is the major exporter of medical supplies to Australia followed by Germany, Japan and the EU. There is no pressure to reduce costs. A strategic alliance may be needed down the road if a strong competitor does start to emerge. It is important that the pacemaker evolves over time or competitors will develop a better product. â€Å"Global Standardization† may be an option because customization of the pacemaker is not needed. It is a universal product. Costs will be low. Aggressive pricing can be used. The drawback is a competitor may create a better product through evolution. â€Å"Localization† would not work because customization is not needed. Consumer tastes and preferences do not come into play for this product. â€Å"Transnational† is also not needed at this time because cost is not a factor and customization for local demands do not exist. This is a complex strategy that I will not need to apply. Because of local culture, I will need to find a local agent to work with in Australia. The aging population, demands for a higher quality of life and increasing affluence have created a demand for quality medical devices. Reference: Global Business Today My project is to import car care and weather resistant equipment into Canada. This is not a new idea and it is not a product that cannot be found really anywhere in the world. The strategy that seems to fit my project best is the international strategy. The reason is that it is not unique in idea. The vital importance is expanding the market for the product. There will be minimal change to the product and with the non existent trade barriers of NAFTA importation will go smoothly. Since the majority of the Canadian population lives so close to the US borer transportation costs will not extend far beyond deliveries to the NorthEast/NorthWest. The other option would be a Localization strategy as we could focus on specific markets such and alternative transportation vehicles equipment that are used in the snowbound areas. The Localization strategy is the most important in the marketing aspect.The localization and transnational strategies are the best matches for my proposed product which is a UK-based channel on YouTube that is mostly ran from the United States. My product is based on my current occupation and we have several international channels that have launched with steady success. There are four major international business strategies: globalization, transnational, international, and localization. Globalization strategy occurs when a firm focuses on profit by utilizing economies of scale, localization, and learning efforts. This strategy is the most helpful when firms are pressured to reduce costs and local responsiveness is low. International strategy occurs when a firm creates value by selling products internationally that were created domestically and do not require significant customization. Transnational strategy occurs when a firm tries to achieve lower costs by economies of scale, localization, and learning efforts and also focusing on products that are tailored to local markets. Economies of scale and learning efforts will not be factors within my strategy, however localization plays a large role. Because some of the content on the channel will be created in the UK to create a sense of community, creative contractors will create the content which lends itself to a more identifiable relationship with consumers. Expanding a content-based business from the United States to the UK benefits best from concise localization strategy. Content that is tailored for a consumer in the UK adheres to high local responsibility. Because both countries are English-speaking, content can be shared by both venues and avoid translation costs or and also reduce cost of creating content. This may help alleviate the localization strategy’s characteristic struggle to lower the high pressure for cost reductions. References: Hill, C. W. (2011). Global Business Today (7th Edition ed.). New York, NY, USA: McGraw-Hill. I am selling a pacemaker in Australia. The â€Å"International Strategy† would be the best for my product. It is produced in the US currently and does not need customization to sell in Australia. Pacemakers fulfill a universal need. Australia imports 85-90% of medical devices. Currently the US is the major exporter of medical supplies to Australia followed by Germany, Japan and the EU. There is no pressure to reduce costs. A strategic alliance may be needed down the road if a strong competitor does start to emerge. It is important that the pacemaker evolves over time or competitors will develop a better product. â€Å"Global Standardization† may be an option because customization of the pacemaker is not needed. It is a universal product. Costs will be low. Aggressive pricing can be used. The drawback is a competitor may create a better product through evolution. â€Å"Localization† would not work because customization is not needed. Consumer tastes and preferences do not come into play for this product. â€Å"Transnational† is also not needed at this time because cost is not a factor and customization for local demands do not exist. This is a complex strategy that I will not need to apply. Because of local culture, I will need to find a local agent to work with in Australia. The aging population, demands for a higher quality of life and increasing affluence have created a demand for quality medical devices.

The Alchemist Summary Part One

Mabel Medina July 1, 2012 English 513 Kelly Understand The Alchemist Summary In â€Å"Part One† of The Alchemist by Paulo Coelho, is so far about a boy named Santiago starting out his quest in the search of his Personal Legend. Santiago is a shepherd who likes to travel and enjoys being around his sheep. Although he travels all over, there was a certain village the shepherd boy enjoyed going to sell his sheep’s wool because he liked the merchant’s daughter.The author describes Santiago recall why he decided to become a shepherd and how his father helped him by giving him three gold coins to buy his flock of sheep. The boy was happy being a shepherd; he had his sheep, a jacket and book. One day, Santiago went to a Gypsy where he tells her about a recurrent dream he has had about finding treasure in the Egyptian pyramids. The Gypsy does not give him a lot of information about his dream, but does tell him that if he finds the treasure, to give her one-tenth.Later on that day, the boy is reading his book, when an old man came by him and tried to start a conversation. When the old man finally got the boy’s attention, he tells him he is the King of Salem, and how he can find the hidden treasure, but wants one-tenth of his sheep in return. The old man also tells the boy to not give up and to go forth and search for the treasure before it is too late and he gives up. The next day, Santiago met up with the old man and gives him one-tenth of his sheep.In return, the old man gave the boy advice that would be helpful throughout his journey, and two rocks, Urim and Thummim (one black meaning yes, and the other white, meaning no), to help him read omens better. Santiago began his journey and went to Africa. While in Africa, as the author describes, the boy feels insecure because of the language barrier, but quickly entrusts in a boy who speaks the same language as he and invites him along his journey. The two boys go into the plaza, and Santiagoâ €™s new friend is suddenly out of sight, with all of his money, and he later realizes that his â€Å"friend† has robbed him.The following day, the boy observes a candy seller, and as he is doing so, he realizes that he needs to have patience on his journey. A crystal merchant notices Santiago in the plaza and watches him. Santiago offers to clean his glass windows in exchange for food. As Santiago was working, two customers went in the shop, and the crystal merchant offers him a job, taking the customers as a good omen. The boy accepts, telling him that he will work for him until he has enough money to buy some sheep.